What To Do When the Thermostat Does Not Reach Set Temperature?

 What To Do When the Thermostat Does Not Reach Set Temperature?

Do you have issues with your thermostat failing to reach the desired temperature? We can assist you. One of the most common issues customers have with their HVAC system is this. Our skilled team can test your system, identify the issue, and resolve it. We can also assist you with malfunctioning thermostats or HVAC-related other problems.

Moreover, you were also eager to know what the hold button on a thermostat mean? So, the hold button in the thermostat will lock the temperature you set. It will only change when you want to change. Following that, when you feel ready for the schedule, resume it by pressing the run button.

What causes the thermostat not to reach the set temperature?

The thermostat problems start while experiencing too hot or too cold at your home. Thus, below are some of the causes or issues you may see when not reaching the desired temperature.

  • The thermostat is either faulty, filthy, or doesn’t work properly.
  • A simple recalibration is required.
  • A thermostat problem is caused by loose wiring.
  • Your home’s HVAC system is inadequate.
  • The thermostat is in an inconvenient location.
  • Your air conditioner or heater is malfunctioning.
  • Dirty ducts or vents cause airflow problems.

What steps can be taken to repair the thermostat?

By recalibrating your thermostat, one can easily repair them. A cooling and heating system may fail to reach the thermostat temperature if the calibration is incorrect. This is most likely an issue if you have a modern thermostat or recently lost power due to a power outage or low batteries. Over time, an old thermostat may need to be re-calibrated. Otherwise, you can contact the HVAC services in Hinsdale to get it repaired.

Moreover, you may need to replace your thermostat if it doesn’t stay calibrated properly. Even if you experience a power outage, your thermostat shouldn’t need to be reprogrammed numerous times a year.

Hence, you can easily verify the calibration of your thermostat. Place an accurate thermometer near the thermostat and check to see if the temperature matches the temperature on the thermostat. Else, call a professional if it’s off by more than one or two degrees. They can do additional testing to see whether the calibration can be corrected.

The Takeaway

If it looks like your thermostat is not working properly, then the main issue is with the HVAC system. Thus, you will need a professional to determine whether it can be repaired or else you need to replace it.

John Warner